Floor

Sampson has floor coatings to protect wooden floors from the wear of pedestrian traffic and from liquid spills such as water, drinks or common household foods and chemicals.

Sampson floor coatings are formulated for use over bare wood. The coatings penetrate into the wood to seal pores and keep water out to prevent wood rot. The dry coating can be sanded to form a smooth surface after a conveniently short dry time.

Poly-U-Var Premium Urethane Clear Wood Finish

Poly-U-Var Premium Polyurethane Clear wood finish is an extremely durable varnish recommended for interior residential or commercial floors, paneling, cabinets, doors, trim, furniture, bar tops, etc. It is superior to conventional urethanes in toughness, resistance to abrasion and resistance to water and chemicals such as cleaners.

It is not recommended for rough texture paneling or siding.

  • Superior Abrasion Resistance

  • Exceptional Flow and Leveling

  • High Build

  • Low Odor

  • Certified by the Maple Flooring Manufacturers Association

Poly-U-Var

020923- Satin

020924- Gloss

020925- Semi-gloss

WoodArmor Hi Build Polyurethane

WoodArmor Hi Build Polyurethane is a high solids Oil-modified Sealer recommended for all residential and commercial wood flooring applications where an extremely durable clear coating is required. It is available in three popular sheens, Gloss, Semi-Gloss and Satin. It can also be used to protect wood paneling, cabinets, doors, trim, and furniture. It is not recommended for rough texture paneling or siding. Because of its Hi-Build properties, fewer coats are required to provide the same build and protection versus other commercially available products.

  • Hi Build

  • Very Durable

  • Exceptional Flow and Leveling

Name

062004- Satin

062007- Semi-gloss

062009- GlossSports Finish

Craftsman's Choice Clear Polyurethane Finish

Craftsman's Choice Clear Polyurethane Finish is an extremely durable clear coating recommended for interior residential or commercial floors, paneling, cabinets, doors, trim and furniture. It has excellent durability and chemical resistance.

It is not recommended for rough texture paneling or siding.

  • Abrasion Resistance

  • Exceptional Flow and Leveling

  • Durability

Craftsman's Choice

164004- Satin

164007- Semi-gloss

164009- Gloss

Krystalac Plus Pre-catalyzed White CAB Lacquer

Krystalac Plus Pre-catalyzed CAB Lacquer is a non-yellowing wood finish with outstanding durability. It is highly resistant to most household and commercial chemicals.

It is recommended for use on desks, kitchen cabinets, restaurant tables and furniture located in high traffic areas. The Krystalac Lacquer series will not yellow as will nitrocellulose lacquers and varnishes.

  • Good Stain Resistance

  • Cold Check Resistance

  • Will Not Lift

  • Non-yellowing

  • Alcohol Resistance

Krystalac Plus

231044- Satin

231047- Semi-gloss

231049- Gloss

SamSeal Professional Urethane Wood Finish

SamSeal Professional Urethane Wood Finish is an extreme durable alkyd-free sealer formulated to seal and protect bare wood surfaces. It is for interior residential or commercial floors, paneling, cabinets, doors, trim, bar tops and furniture, etc. It is superior to conventional urethanes in toughness, resistance to alcohol, water, cleaners and abrasion.

It is not recommended for rough texture paneling or siding.

  • Seals and Protects

  • Sands Easily

  • Low Odor

  • Excellent Abrasion Resistance

  • Quick Recoat

  • Excellent Flow and Leveling

SamSeal

020935- Gloss

020934- Semi-gloss

020933- Satin

062009 WoodArmor Polyurethane Sport Finish

WoodArmor Sport Finish is a high solids, high gloss, 100% Oil-modified urethane sealer recommended for all gymnasium, residential and commercial wood flooring applications where an extremely durable clear coating is required. Fewer coats are required to achieve the same build and protection vs. other commercial products.

  • Abrasion Resistance

  • Durability

  • Good Flow and Leveling

062009- Gloss Finish

164009 Gym Finish Gloss

This polyurethane sealer is an extremely durable clear coating recommended for gym floors and commercial use. It offers excellent excellent flow and leveling, durability and chemical resistance.

  • Abrasion Resistance

  • Durability

  • Exceptional Flow and Leveling

164009- Gym Finish Gloss

2K Waterborne Urethane

Sampson's 2K Waterborne Urethane coating was designed for use on floors requiring exceptional toughness and durability that cannot be obtained from the best single component solvent urethanes. It does not use a polyisocyanate activator and thereby avoids pot-life and gellation problems. Unlike other waterborne urethanes, it does not look like plastic. It will simulate the rich look of solventborne urethanes without the associated odor, long dry time or VOC concerns.

  • Superior Abrasion Resistance

  • Low Odor

  • Fast Dry

  • Low VOC

  • Appearance of a Solventborne Urethane

Name

041004- Satin

041007- Semi-gloss

041009- Gloss

AquaVar Waterborne Urethane Clear Varnish

AquaVar Waterborne Clear Varnish is an extremely durable, light amber shade waterborne finish. It derives its outstanding performance characteristics from a top quality aromatic waterborne polyurethane dispersion as the sole resin. It is modified with carefully selected wetting, leveling and defoaming additives.

It is very low in VOC's and it can be used in all OTC regions. AquaVar will yellow slightly on aging, similar to conventional oil modified urethanes, enhancing the beauty of the natural patina of the wood.

It has superior resistance to abrasion, alcohol, water, household cleaners and chemicals. It is recommended to protect all types of interior residential and commercial wood products such as floors, paneling, cabinets, doors, trim and furniture.

AquaVar

020930- Gloss

020931- Semi-gloss

020932- Satin

AquaVar Waterborne Urethane Clear Varnish

AquaVar Waterborne Clear Varnish is an extremely durable, light amber shade waterborne finish. It derives its outstanding performance characteristics from a top quality aromatic waterborne polyurethane dispersion as the sole resin. It is modified with carefully selected wetting, leveling and defoaming additives.

It is very low in VOC's and it can be used in all OTC regions. AquaVar will yellow slightly on aging, similar to conventional oil modified urethanes, enhancing the beauty of the natural patina of the wood.

It has superior resistance to abrasion, alcohol, water, household cleaners and chemicals. It is recommended to protect all types of interior residential and commercial wood products such as floors, paneling, cabinets, doors, trim and furniture.

AquaVar

020930- Gloss

020931- Semi-gloss

020932- Satin